Team4G.com Forum Index
EVO ECU Pinout & Colour Chart - COMPLETED

 
Post new topic   Reply to topic    Team4G.com Forum Index -> Evolution 1-3, CC GSR Technical
View previous topic :: View next topic  
Author Message
EVO-00X
Team4G Resident Post Whore


Joined: 18 Jun 2005
Posts: 2136
Location: Newcastle

PostPosted: Fri Nov 16, 2007 11:09 pm    Post subject: EVO ECU Pinout & Colour Chart - COMPLETED Reply with quote

Hi all. I've collected a few different ECU pinout drawings and wiring codes and combined the best descriptions into one. A couple were sourced from forums, one was a 3-page scan of a Mitsubishi document, and a couple were sourced from cross referencing to the 4G93 diagrams to see if the pinout had the same use or a better description. Nearly all of the info when put side between each of them matched up or made better sense which helped confirm each pinout. Basically I was comparing and confirming each pinout and entered the data into an excel spreadsheet (I sort of copied a layout someone did a while ago which I thought was a good idea but I added better descriptions to it).

DOWNLOADABLE PDF FILE

http://www.mediafire.com/?2guqyy3wl2y

cheers

Rob

_________________
http://www.evocoupe.net/
EVOLVED AWD COUPE


Last edited by EVO-00X on Fri Nov 30, 2007 2:26 pm; edited 3 times in total
Back to top
View user's profile Send private message Visit poster's website MSN Messenger
antilag
Team4G New Member


Joined: 09 Nov 2007
Posts: 6
Location: Sydney

PostPosted: Fri Nov 16, 2007 11:21 pm    Post subject: Reply with quote

Here rob.. You might have to be a member to enter has Evo 3-8 pinouts

http://www.lancerregister.com/showthread.php?s=&threadid=142077
Back to top
View user's profile Send private message
EVO-00X
Team4G Resident Post Whore


Joined: 18 Jun 2005
Posts: 2136
Location: Newcastle

PostPosted: Sat Nov 17, 2007 1:31 am    Post subject: Reply with quote

Cheers. That's one of the ones I used to compare with and adopted his style because it is set out well. I have added to his with more info and I'll go through that site and update any extra stuff found out along the way Cool . This is the original one from that site Smile :


evo_3_ecu.jpg
 Description:
 Filesize:  92.06 KB
 Viewed:  257 Time(s)

evo_3_ecu.jpg



_________________
http://www.evocoupe.net/
EVOLVED AWD COUPE
Back to top
View user's profile Send private message Visit poster's website MSN Messenger
EVO-00X
Team4G Resident Post Whore


Joined: 18 Jun 2005
Posts: 2136
Location: Newcastle

PostPosted: Sat Nov 17, 2007 1:46 am    Post subject: Reply with quote

Cool thanks mate, from that site have since discovered these:

Pin 3 = RADIATOR FAN RELAY (A/C LOW)
Pin 16 = RADIATOR FAN RELAY (A/C HIGH)
Pin 41 = NEGATIVE TRIGGER FOR TURBO SPOOL ICON IN EVO 1/ GSR GAUGES CLUSTERS

Keep 'em coming boys Cool

_________________
http://www.evocoupe.net/
EVOLVED AWD COUPE
Back to top
View user's profile Send private message Visit poster's website MSN Messenger
antilag
Team4G New Member


Joined: 09 Nov 2007
Posts: 6
Location: Sydney

PostPosted: Sat Nov 17, 2007 8:39 am    Post subject: Reply with quote

Another source that might have the information, is somebody that has the Autronic Evo Plug-In ecu manual. I remember seeing the pinout diagrams at my tuners a few weeks ago. Unfortunately I dont have a copy Sad

I've also heard the E4 ecu pinouts are similar to E3. Not sure how true it is. But i know to install an Autronic for an E1-3, you can use their E4 designated model plug-in with a few plug changes.
Back to top
View user's profile Send private message
3zercrowd
Team4G Administrator


Joined: 22 Apr 2005
Posts: 2485
Location: Townsville, QLD

PostPosted: Sat Nov 17, 2007 5:42 pm    Post subject: Reply with quote

Stickied yo Wink Very Happy
_________________
Dane/Lancer GSR
12.552@106.88MPH!!!
Needs more Kilowatts!
Built not bought motorsport!
Built in the shed, not the workshop.
Back to top
View user's profile Send private message Send e-mail MSN Messenger
Liberoz
TEAM4G 1000 Club


Joined: 22 Jan 2006
Posts: 1110
Location: Sydney

PostPosted: Sun Nov 25, 2007 10:30 am    Post subject: Reply with quote

here's another ECU tech referance for you rob
http://www.roadraceengineering.com/evo/tech/EVO-ecuwiring.htm

_________________
John
LiberoGT / RSEII
Back to top
View user's profile Send private message
Richard
TEAM4G 1000 Club


Joined: 06 Jun 2006
Posts: 1079
Location: Bentleigh East, Melbourne

PostPosted: Sun Nov 25, 2007 11:26 am    Post subject: Reply with quote

Pic I found along the way, looks like yours is WAY better tho!


4g93ecupinout.jpg
 Description:
 Filesize:  24.68 KB
 Viewed:  202 Time(s)

4g93ecupinout.jpg



_________________
77 RA28 Toyota Celica
93 Lancer GSR
Wanted: EVO I/II FRONT BAR

Problems are solved by concentrating on what is right not who is right.

Link to my ride thread: http://team4g.com/forums/viewtopic.php?t=6212
Link to my stuff for sale: http://team4g.com/forums/viewtopic.php?p=52674
Back to top
View user's profile Send private message MSN Messenger
EVO-00X
Team4G Resident Post Whore


Joined: 18 Jun 2005
Posts: 2136
Location: Newcastle

PostPosted: Sun Nov 25, 2007 5:09 pm    Post subject: Reply with quote

Liberoz link is for a later model EVO which has 4 x ECU plugs, not 3 like in the GSR/EVO I-III. However some of the items that are located in the same pinout position add to a better description of the same pinout on the EVO I-III so I'll update the ECU drawing again Smile i.e. Ignition signal amplifier A (transister) = now called Ignition Power Transister/Amplifier A for cyclinders 1 & 4 Wink

The other little pic above from Richard shows the wires you need to splice to when wiring in an Apexi AVC-R into a CC GSR/EVO/Libero Wink

DIAGRAM UPDATED

_________________
http://www.evocoupe.net/
EVOLVED AWD COUPE
Back to top
View user's profile Send private message Visit poster's website MSN Messenger
EVO-00X
Team4G Resident Post Whore


Joined: 18 Jun 2005
Posts: 2136
Location: Newcastle

PostPosted: Fri Nov 30, 2007 2:27 pm    Post subject: Reply with quote

Completed. PDF is now available in the first thread for download Cool
_________________
http://www.evocoupe.net/
EVOLVED AWD COUPE
Back to top
View user's profile Send private message Visit poster's website MSN Messenger
MADEVO
TEAM4G 1000 Club


Joined: 16 Jun 2005
Posts: 1090
Location: Langwarrin

PostPosted: Wed Dec 05, 2007 8:22 am    Post subject: Reply with quote

used the complete wiring diagram on the weekend!!! THANK YOU VERRY MUCH!!!! Very Happy
Back to top
View user's profile Send private message
shadow
Team4G Member


Joined: 16 Sep 2006
Posts: 108
Location: Queensland

PostPosted: Thu Feb 07, 2008 7:13 pm    Post subject: Reply with quote

Does anyone know the differences between the evo 1-3 ecu wiring and the Aus Spec GSR ecu? Been considering making up my own loom for the climate control.....
Back to top
View user's profile Send private message
JonnyRochester
Team4G Member


Joined: 18 Sep 2005
Posts: 36
Location: Hobart, TAS

PostPosted: Mon Apr 07, 2008 7:01 pm    Post subject: Reply with quote

Anyone doing any serious work regarding these ECU pinouts (engine converions, different computers, rewiring etc) also needs to know the pinouts of the main relay. It is called the "MFI Relay". It has 2 relays in it, one controling the fuel pump. The other sends power to the sensors, injector resistor, and the ECU. It is important to see a wiring diagram to see how the relay interacts with the ECU, pinouts are not always enough.

On some Mitsubishis, the fuel pump side of the relay is momentarialy powered by the starter signal while cranking. On the Evo I,II,III the starter signal is sent to the ECU. The ECU then decides when to activate the fuel pump relay (and it does this while cranking).

Not all Mitsubishi MFI relays are wired the same. The Evo I is a 8 pin connector and these are the pinouts.

MFI Relay:
1. to fuel pump Black/blue
2. sensor power Red
3. Main power to ECU, pins 12 & 25 on ECU
4. 12V power Black/yellow

5. fuel pump signal, from ECU pin 8
6. power signal, from ECU pin 38
7. Ignition and also pin 62 on ECU
8. 12V power Black/yellow


Last edited by JonnyRochester on Tue Apr 08, 2008 9:45 pm; edited 1 time in total
Back to top
View user's profile Send private message Send e-mail MSN Messenger
EVO-00X
Team4G Resident Post Whore


Joined: 18 Jun 2005
Posts: 2136
Location: Newcastle

PostPosted: Mon Apr 07, 2008 7:50 pm    Post subject: Reply with quote

Can you list the corresponding colours on the MFI (engine control relay) plug for us please? Smile

I've never had any issues with incompatible wiring of relays doing 4G93T/4G63T conversions to GLXi's or GSR's but it would be good to have the pinouts as reference. I've even put Proton Gti/M21 engines into GLXi's using the Proton ECU and engine loom and just used their twin relay setups which was virtually plug and play as well. Pretty easy to convert across the board if you get the corresponding relay with the engine loom. Gotta love Mitsus Twisted Evil

_________________
http://www.evocoupe.net/
EVOLVED AWD COUPE
Back to top
View user's profile Send private message Visit poster's website MSN Messenger
JonnyRochester
Team4G Member


Joined: 18 Sep 2005
Posts: 36
Location: Hobart, TAS

PostPosted: Tue Apr 08, 2008 9:50 pm    Post subject: Reply with quote

I just put up some colours there. Where the ECU pin is listed, it is the same wire and colour as at the ECU, (or MFI as Mitsubishi call it).
_________________
JDS Auto Imports
Back to top
View user's profile Send private message Send e-mail MSN Messenger
Display posts from previous:   
Post new topic   Reply to topic    Team4G.com Forum Index -> Evolution 1-3, CC GSR Technical All times are GMT + 10 Hours
Page 1 of 1
Watch this topic for replies
 

Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum
You can attach files in this forum
You can download files in this forum


2008 Team4G   Website Development by three am design

 

Global View of 000000 and further information concerning verdana
The Fastest FTPS on the planet FREE Go FTP Client