This is kind of a cheap mod to get your rear blinkers to be clear. Some people say it looks retarded. I simply used orange bulbs in the backup lenses and rewired a few things. Granted, your reverse lights will have to take the place of your old blinkers, which are orange. You can leave the reverse lights disconnected, or even put another bulb next to the orange bulb inside the backup lens.

1.) To taillight assembly, green/blue wire. Blinker wire.
2.) Green/Blue wire to harness
3.) Red positive wire to reverse bulb
Simple as the picture, connect 2, to 3 and blink away.


Same thing here,
1.) Green/Red to taillight
2.) Green/Red to harness, blink blink
3.) My white wire to right backup bulb.

The reason I used a separate wire was the fact that I think there is only one wire connecting both reverse bulbs, which would make both lights blink, if you clicked left or right. You can cut the stock wire and use that, but it's buried under the bumper.
 

Buy a pack of orange bulbs, this is easier than the front. The bottom "knob" on the side of the bulb fits in the Mirage spring clip connector where the bulb connects to. The upper "knob" on the orange bulb is up farther than the mirage clear bulb, so it won't lock into place. I used the soldering iron to melt the indentation inside of the grey connector so the bulb would pop into the Mirage grey bulb holder and stay there. Wheew. You may be able to do this same thing up front. There are some orange bulbs that fit right in, I forget the part number though.  You can also get 92 Mirage rear taillights, which are red/clear, instead of red/orange.